Layer 2 to Teraco
- Connect a remote site to Teraco Data Center
- Cross Connect setup virtually at Teraco. (Physically for special cases)
- Symmetrical link speed
- Local support
- Layer 2 link is handed over on a VLAN
- Connect a remote site to Teraco Data Center
- Cross Connect setup virtually at Teraco. (Physically for special cases)
- Symmetrical link speed
- Local support
- Layer 2 link is handed over on a VLAN
With our Layer 2 to Teraco service, you can establish a secure and direct connection, bypassing the public Internet. Connect seamlessly from any point on the Jenny Internet wireless network in Lusaka to Teraco at 5 Brewery Street, Isando, Johannesburg
At Teraco, we can assist in setting up an interconnection, whether physical or virtual, that strictly adheres to Teraco's standards. With swift deployment and backed by our local technical support, your Layer 2 to Teraco connection will be up and running in no time.
With our Layer 2 to Teraco service, you can establish a secure and direct connection, bypassing the public Internet. Connect seamlessly from any point on the Jenny Internet wireless network in Lusaka to Teraco at 5 Brewery Street, Isando, Johannesburg
At Teraco, we can assist in setting up an interconnection, whether physical or virtual, that strictly adheres to Teraco's standards. With swift deployment and backed by our local technical support, your Layer 2 to Teraco connection will be up and running in no time.

Easy. Secure. Direct.
See below line speed options. Please choose your location for accurate pricing.
Cost is the service price p/m inc VAT
Layer 2 to Teraco |
Local Loop L2 Incl VAT |
Layer 2 to Teraco Bandwidth Incl VAT |
Excise Duty |
Total Incl VAT |
---|---|---|---|---|
100Mbps / 100Mbps | K 28,292.00 | K 18,861.42 | K 2,845.00 | K 49,999.00 |
50Mbps / 50Mbps | K 14,711.00 | K 9,807.60 | K 1,480.00 | K 25,999.00 |
25Mbps / 25Mbps | K 7,355.00 | K 4,903.60 | K 740.00 | K 12,999.00 |
10Mbps / 10Mbps | K 3,112.00 | K 2,074.40 | K 313.00 | K 5,499.00 |
4Mbps / 4Mbps | K 1,414.00 | K 942.80 | K 142.00 | K 2,499.00 |
Ready to get Layer 2 to Teraco?
We aim to satisfy...no matter where you are
FAQ
Here are the most frequently asked questions about Layer 2 to Teraco.
If you have any additional questions don't hesitate to speak to us.
Client side equipment will be installed between 1 and 7 working days as well as the time it takes Teraco to install the cross-connect.
The standard MTU is 1500.
- Jumbo MTU sizes are also available upon request, but please note that these links will cost more and might be less resilient due to single points of failure.
National call centre, 7 days a week with three levels: Support, Advanced Support, and Technical.